ASTM A269 Seamless and Welded Austenitic Stainless Steel Tubing for...

ASTM A269 Seamless and Welded Austenitic Stainless Steel Tubing for General Service

ASTM A269 - 13
Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

This specification covers nominal-wall-thickness, seamless and welded austenitic steel tubing for general corrosion-resisting and low- or high-temperature service. All material shall be furnished in the heat-treated condition. The steel shall conform to the chemical composition requirements. Different mechanical test requirements that includes, flaring test, flange test, hardness test, and reverse flattening test are presented. Also, each tube shall be subjected to the non-destructive electric test or the hydrostatic test. Finally the hardness requirements for different grades of tubes are highlighted.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope
1.1 This specification covers grades of nominal-wall-thickness, stainless steel tubing for general corrosion-resisting and low- or high-temperature service, as designated in Table 1
1.2 The tubing sizes and thicknesses usually furnished to this specification are 1/4 in. (6.4 mm) in inside diameter and larger and 0.020 in. (0.51 mm) in nominal wall-thickness and heavier.
1.3 Mechanical property requirements do not apply to tubing smaller than 1/8 in. (3.2 mm) in inside diameter or 0.015 in. (0.38 mm) in thickness.
Note 1—Additional testing requirements may apply for use in ASME B31.3 applications.
1.4 Optional supplementary requirements are provided and, when one or more of these are desired, each shall be so stated in the order.
1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

2. Referenced Documents (purchase separately)
ASTM Standards
A262 Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
A370 Test Methods and Definitions for Mechanical Testing of Steel Products
A480/A480M Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A632 Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
A1016/A1016M Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
E527 Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
ASME Piping Code
ASMEB31.3 Process Piping

Other Standard
SAEJ1086 Practice for Numbering Metals and Alloys (UNS)

3. Ordering Information
3.1 Orders for material under this specification should include the following, as required, to describe the desired material adequately:
3.1.1 Quantity (feet, metres, or number of lengths),
3.1.2 Name of material (seamless or welded tubes),
3.1.3 Grade (Table 1)
3.1.4 Size (outside diameter and nominal wall thickness),
3.1.5 Length (specific or random)
3.1.6 Optional requirements (heat treatment, see Section 6; hydrostatic or nondestructive electric tes, see Section 10),
3.1.7 Test report required (see Section on Inspection of Specification A 1016/A 1016 M),
3.1.8 Specification designation, and
3.1.9 Special requirements and any supplymentarty requirements selected.

4. General Requirements
4.1 Material furnished under this specification shall conform to the applicable requirements of the current edition of Specification A 1016/A 1016M, unless otherwise provided herein.

5. Manufacture
5.1 The tubes shall be made by the seamless or welded process.
5.2 At the manufacturer's option, tubing may be furnished either hot finished or cold finished.

6. Steel Grade
Grade - UNS Designation
ASTM A269 Grade TP 304 - S30400
ASTM A269 Grade TP 304L - S30403
ASTM A269 Grade TP 304LN - S30453
ASTM A269 Grade TP 316 - S31600
ASTM A269 Grade TP 316L - 31603
ASTM A269 Grade TP 316LN - S31653
ASTM A269 Grade TP 317 - S31700
ASTM A269 Grade TP 321 - S32100
ASTM A269 Grade TP 347 - S34700
ASTM A269 Grade TP 348 - S34800
ASTM A269 Grade TP XM-10 - S21900
ASTM A269 Grade TP XM-11 - S21904
ASTM A269 Grade TP XM-15 - S31800
ASTM A269 Grade TP XM-19 - S20910
ASTM A269 Grade TP XM-29 - S24000
ASTM A269 Grade S31254
ASTM A269 Grade S31725
ASTM A269 Grade S31726
ASTM A269 Grade S30600
ASTM A269 Grade S24565
ASTM A269 Grade S32654
ASTM A269 Grade S35045
ASTM A269 Grade N08367
ASTM A269 Grade N08926
ASTM A269 Grade N08904

The Chemical Composition and Mechanical Properties of above Steel grade, please check original ASTM A269.

Austenitic Stainless Steel - Corrosive Service Applications - High-Temperature Service Applications - High-Temperature Services - Low-Temperature Services - Seamless Pipes And Tubes - Seamless Steel Tubes - Stainless Steel Tubes - Steel Tubes - Tubular Products - Welded Pipes And Tubes - Welded Steel Tubes

Previous << NONE

Next >> API Spec 5CT N80-Q Casing Pipe

© 2013 Copyright by HEBEI MACRO ENTERPRIS